For Accuracy Retention and Use On Already Zeroed Rifles

Laser Bullet allows shooters the fastest way to sight in or zero their rifles by reducing the number of live rounds of ammo needed.

Once zeroed in, the Laser Bullet allows retention of pinpoint accuracy without even firing a shot. (Advantageous when the rifle is knocked, has fallen over or had removed the scope or other sighting device removed.)

This is best achieved by:

• Getting a piece of blank A4, graph, or target paper.
• Drawing a crosshair if a target is unavailable.
• Setting up at a distance of about 30 metres away.
• Loading the Laser Bullet.
• Aiming the correctly zeroed in rifle at the crosshairs.
• Circling with a pen where the Laser Dot occurs. (Should normally be a little below the crosshairs at 30 metres.)
• Marking down on the paper the details of the rifle and load used.
• Now if the rifle is knocked or the scope removed, it will not be necessary to fire a single shot in order to have the same degree of accuracy. Simply set up as before, aim the laser dot onto the spot marked out, and re-adjust the crosshairs to where they were originally drawn on the paper.

The ability to be able to do this offers the opportunity to:

• Sight in the rifle at home in the backyard, even in town.
• Because you won't be making any noise, you won't be scaring any game off.
• Manufactured in Australia.

The Laser will help you when:

• You have just mounted a new scope or other sighting device
• You have just bumped your rifle
• You have not used your rifle in a long time and want to verify its accuracy

You will find the Laser Bullet very easy to use and much more reliable and accurate than any other bore sighting device